More Concrete = Stronger Footings ?????

Not True !!!!!

More Concrete Does not necessarily mean Stronger Footings.



A post in the ground is only as solid as the ground around it. Concrete holds moisture. Rot needs air and moisture and fuel (sugar) to form. The worst place to have a concrete/wood intersection is at ground level.

Second factor is that when you dig a hole, the top of the hole is normally larger than the base of the hole which causes frost to be able to lift the post (and your fence) out of the ground - dirt washes in beneath the footing and it gets higher every year.

Bell the hole you say? If the bottom of the hole is larger, and the top of the hole is larger, as the frost sets in it will shear the concrete between the two. Don’t underestimate the power of frost.

What's the big deal about setting Fence Posts ?????
Sounds easy enough.

No one who has never tried setting fence posts in the ground properly can appreciate the challenge involved. For a closer look at setting fence posts, please below....

Setting fence posts so that they're plumb and evenly spaced is part of the challenge. But surprisingly, even digging holes and filling them with concrete is fraught with difficulties.

The problem begins with the shape our holes normally take. The top of the average hole that you dig is bound to be wider than the bottom, since you have easier access to the top portion. The result is a V-shaped hole. Novices anticipate no problem in setting fence posts in such holes, then filling the holes up with concrete. But when you fill those V-shaped holes with concrete, you end up with V-shaped hunks of concrete. And in areas subject to frost, this can be an invitation to trouble down the road.

The trouble begins when frost starts to heave your concrete upwards, using the tops of those V-shaped concrete footings to grip them (since the tops form a lip). Dirt then slips in beneath the concrete. Your fencing is raised as a result. The process is then repeated next winter, raising your fencing a bit further. And so on. Eventually, your concrete footings will be significantly elevated beyond where they should be, resulting in instability. Of course, such movement will never occur evenly along the whole course of your fencing, resulting in yet another problem: your fencing will no longer be level.

If you're still intent on setting fence posts yourself, rather than having a professional do it, the key is in filling the hole only halfway up with concrete. Even though it seems this would result in less stability, this is not the case. Instead, you're depriving Jack Frost of a lip he can use to get a tighter grip on the concrete footing. After the concrete sets, fill up the rest of your hole with your excavated soil (or gravel in damp areas), and tamp it down firmly. Another alternative is to buy one of those cylindrical concrete forms, available at homeimprovement stores.